Dillon 30007-0174 AP Mechanical Dillon Dynamometer, 5,000 KG Capacity, 10" Dial Size

Price: $ 1,810.00

Dillon AP Mechanical Dynamometer
Mechanical Dillon APDynamometers
For tension, traction and weight measurement
Available in capacities from 500 to 100,000 pounds, 200 to 50,000 kilograms, 2,000 to 500,000 Newtons

The Dillon AP Mechanical Dynamometer exhibits limitless versatility as a tension, traction and weight measuring instrument.

Full selection of capacities--
Available in capacities from 500 to 100,000 pounds, 200 to 50,000 kilograms, 2,000 to 500,000 Newtons.

Long life--
The core of the device is a steel flexing beam. The enclosure is a heavy aluminum alloy case with baked on protective finish. The dial face is sealed and cushioned with a rubber gasket.

Safe for overhead applications--
Most models have a 5:1 ultimate safety factor.

Zero control--
Use it like a tare. It can cancel preset load values up to 20% of device capacity.

NIST Traceable - The EDxtreme comes with a NIST traceable calibration certificate.



  • Accuracy: 0.5% of full scale capactiy for precise data.
  • Broadest range of capactities and resolutions are certain to fit your needs
  • Wide temperature range for use in nearly any environment (-50 to 140F / -45 to 60C)
  • Largest safety factor for overload protection and long life
  • No batteries required
  • Dial size choice for best in portability or visibility
  • Anti-parallax dial and pointer produce accurate readings from any perspective
  • Maximum hand retains peak load point and is easily reset
  • High strength case resists heavy blows
  • Generous shackle openings mate with most hooks an dhardware
  • High specification materials on all load components. Heat treated to tight tolerances
  • Offset load beam eases tension measurement
  • NIST Traceable Certificate Included

Force Ranges

ModelCapacityResolutionDial Size
AP5-500LB500 lbs55" (125 mm)
AP5-1000LB1,000 lbs105" (125 mm)
AP5-2000LB2,000 lbs205" (125 mm)
AP5-4000LB4,000 lbs255" (125 mm)
AP5-5000LB5,000 lbs505" (125 mm)
AP5-6000LB6,000 lbs505" (125 mm)
AP5-8000LB8,000 lbs505" (125 mm)
AP5-10000LB10,000 lbs1005" (125 mm)
AP5-15000LB15,000 lbs1005" (125 mm)
AP5-20000LB20,000 lbs2005" (125 mm)
AP10-500LB500 lbs210" (250 mm)
AP10-1000LB1,000 lbs510" (250 mm)
AP10-2000LB2,000 lbs1010" (250 mm)
AP10-4000LB4,000 lbs2010" (250 mm)
AP10-5000LB5,000 lbs2010" (250 mm)
AP10-6000LB6,000 lbs2510" (250 mm)
AP10-8000LB8,000 lbs5010" (250 mm)
AP10-10000LB10,000 lbs5010" (250 mm)
AP10-15000LB15,000 lbs10010" (250 mm)
AP10-20000LB20,000 lbs10010" (250 mm)
AP10-30000LB30,000 lbs20010" (250 mm)
AP10-40000LB40,000 lbs20010" (250 mm)
AP10-50000LB50,000 lbs20010" (250 mm)
AP5-200KG200 kg2125 mm (5")
AP5-500KG500 kg5125 mm (5")
AP5-1000KG1,000 kg10125 mm (5")
AP5-2000KG2,000 kg20125 mm (5")
AP5-4000KG4,000 kg25125 mm (5")
AP5-5000KG5,000 kg50125 mm (5")
AP5-10000KG10,000 kg100125 mm (5")
AP10-200KG200 kg1250 mm (10")
AP10-500KG500 kg2250 mm (10")
AP10-1000KG1,000 kg5250 mm (10")
AP10-2000KG2,000 kg10250 mm (10")
AP10-4000KG4,000 kg20250 mm (10")
AP10-5000KG5,000 kg50250 mm (10")
AP10-10000KG10,000 kg50250 mm (10")
AP10-15000KG15,000 kg100250 mm (10")
AP10-20000KG20,000 kg100250 mm (10")


Klaxon signal alarm

Mounted on rear of the Dynamometer and sounds an alarm at a preset load point. For capacities through 20,000 pound (10,000 kg) only

Zero positioning

The standard zero position is 9 o'clock for both the 5" and 10" dial sizes. Capacities up to 20,000 lb can be supplied with the zero at 12, 3 or 6. Photo shows a nonstandard position of 12 o'clock.

Oversized shackle and pin assembly. Available with all AP5 models and up to AP10-20000LB/AP10-10000KG models only.
Addition to standard shackle & pin (sold as an accessory at time of order or after sale)

Steel storage case For 10" (250 mm) diameter model AP10-20000LB/AP10-10000KG and lower

Hook Accessories

Part #Hook RatingFor Dynamometer Ratings
AP-H33-ton500-6,000 lb / 200-2,000 kg
AP-H55-ton8,000-10,000 lb / 4,000-5,000 kg
AP-H1010-ton15,000-20,000 lb / 10,000 kg

Complete Kit

5" (125 mm) diameter AP dynamometer includes a rugged ABS plastic carry case with die-cut foam inserts. Capacities of 30,000 lb (15,000 kg) and above are shipped in a heavy-duty reinforced plywood crate. An optional steel carry case is available for 10" (250 mm) diameter dynamometers up to 20,000 lb (10,000 kg) capacity.

Buy Now

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
Dillon 30007-0174 AP Mechanical Dillon Dynamometer, 5,000 KG Capacity, 10" Dial Size $1,810.00
Accessories Price
Steel storage case for 10 in (250 mm) diameter low and medium capacity AP Dynamometer - 32224-0011 $315.00
Oversized shackle and pin assembly for low and medium capacity dynamometers Only - AWT15-501354 $605.00
36330-0021 3-ton Hook for ranges 500-6,000 lb / 200-2,000 kg $165.00
36330-0039 5-ton Hook for ranges 8,000-10,000 lb / 4,000-5,000 kg $285.00



Powered by Marctin Web Architecture