Dillon CGS-1 CraneGard Clamp-on Load Cell Cable Overload Protection Capacity: 2,500 Repeatability: ±75



Price: $ 2,875.00

Dillon CraneGard Clamp-on Load Cell Cable Overload Protection
Clamps on cables for wire rope hoist, elevator and crane overload prevention and slackline detection.
Installs in minutes with screwdriver and Allen wrench.

The Dillon CraneGard Clamp-on Load Cell Cable Overload Protection for wire rope hoist, elevator and crane overload prevention and slackline detection. Installs in minutes with screwdriver and Allen wrench.

Installation is simplicity itself. Clamp the Cranegard directly onto a slack hoist or crane wire rope quickly without severing rope or interrupting service. Up to four switches can be furnished. Switch actuates immediately when pre-set load limit is exceeded.

Dillon will set the switches to trigger at the loads you desire, if specified at time of order.


line
Features
line

  1. Basic units can accommodate 1,2,3 or 4 of option B or 1 or 2 of option C switches
  2. Ultimate safety factor of all units is 2:1 (1.8:1 for metric capacities)
  3. Cable should be IWRC (Independent Wire Rope Core) with as many strands as possible.
  4. Wire rope selection for any application for proper safety factor is a customer responsibility.
  5. Calibration performed with rope diameter specified at order.


line
Specifications
line

ModelCapacity
lb (kg)
Min. Set Point
lb (kg)
Repeatability
lb (kg)
Rope Diameter*
inches (mm)
CGS-12,500 (1250)100 (50)75 (35)3/16 to 1/2 (5 to 13)
CGS-25,000 (2500)200 (100)150 (75)3/8 to 7/8 (10 to 22)
CGS-310,000 (5000)400 (200)300 (150)7/16 to 7/8 (11 to 22)
CGS-420,000 (10000) 800 (400)600 (300)5/8 to 11/4 (16 to 32)

ModelSwitch Option Width
in (cm)
Height
in (cm)
Length
in (cm)
CGS-11B, 2B
3B 4B
3.6 (9.2)
4.6 (11.8)
5.4 (13.7)11.5 (29.2)
CGS-21C 5.0 (12.7) 6.0 (15.2)11.5 (29.2)
CGS-32C 7.3 (18.4)6.0 (15.2)11.5 (29.2)
CGS-41B, 2B
3B, 3B
1C
2C
4.5 (11.4)
5.4 (13.7)
5.9 (14.9)
8.0 (20.3)
7.8 (19.7) 16.0 (40.6)
* Specify rope diameter when ordering. Other rope diameters can be specified on special order.


line
Applications
line

Force control switch

Force control switches are used to protect cranes, hoists and other lifting machinery against weight or force overload as well as slack load. They are also used to perform control functions in the case of DynaSwitch. There are no dial indicators associated with these devices, only switches which not only shut off power when an overload condition exists, but also operate lights, buzzers or klaxons to warn of an impeding overload.

Cranegard

The Cranegard clamps on to the line allowing it to be mounted where it is not possible to mount a DynaSwitch. No rope cutting is required.


line
Ordering Information
line

When ordering Cranegards:

  1. Specify Model number.
  2. Specify pulley size (determined by rope diameter).
  1. Specify switch option and quantity.
  2. Specify switch set point(s) if factory setting is desired.

Example:

For a 5,000 lb capacity unit with pulleys grooved for 5/8" rope diameter, with three weatherproof option B switches, set at 2,000, 3,000, and 4,000 lb.

Use this shortened form to designate models and options:

CGS-2-B3 For 5/8" rope diameter Switch settings at 2,000 lb (ascending), 3,000 lb (ascending) and 4,000 lb (ascending).


line
Downloads
line

Dillon CraneGard Clamp-on Load Cell Cable Overload Protection - Data Sheet
Dillon CraneGard Clamp-on Load Cell Cable Overload Protection - Instruction Manual

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
Dillon CGS-1 CraneGard Clamp-on Load Cell Cable Overload Protection Capacity: 2,500 Repeatability: ±75 $2,875.00
Accessories Price
Dillon CGS-B1: 1 switch Weatherproof $1,000.00
Dillon CGS-B2: 2 switches Weatherproof $1,525.00
Dillon CGS-B3: 3 switches Weatherproof $2,725.00
Dillon CGS-B4: 4 switches Weatherproof $3,220.00
Dillon CGS-B1-4: 1 switch Weatherproof $2,485.00
Dillon CGS-B2-4: 2 switches Weatherproof $3,005.00
Dillon CGS-B3-4: 3 switches Weatherproof $4,990.00
Dillon CGS-B4-4: 4 switches Weatherproof $5,485.00
Dillon CGS-C1: 1 switch Explosion Proof Microswitches $2,880.00
Dillon CGS-C2: 2 switches Explosion Proof Microswitches $5,365.00
Dillon CGS-C1-4: 1 switch Explosion Proof Microswitches $2,880.00
Dillon CGS-C2-4: 2 switches Explosion Proof Microswitches $4,985.00

 



 
 

Powered by Marctin Web Architecture